We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Make Indoor Putting Green at Home: A Step-by-Step Guide

Learn how to make indoor putting green at home with the right turf, a flat base, and simple practice setup. Build a green that rolls true for daily stroke work.

Updated November 2026

Learning how to make indoor putting green at home takes less time than most golfers expect. You need a flat, level base, a turf surface that rolls true, a cup or hole target, and a way to keep the surface from shifting or wearing unevenly. With those four pieces in place, you can practice speed control and short putts every day, regardless of the weather outside.

Choose Your Surface and Space

Start by measuring the room. A standard home putting green usually runs between 6 and 10 feet long, which gives you enough room for lag putts and short-range work. Leave at least 2 feet of clearance on each side so you can stand comfortably and take a full stroke without bumping furniture.

Shopping for one? See our guide: 7 Best Portable Putting Green Indoor Options for Home Practice (2026).

Next, pick a surface. Indoor putting green carpet is the most common choice because it is made to mimic the speed and roll of a real green. Indoor Putting Green Carpet: How to Choose and Install One (Step-by-Step) covers the material options in detail. Look for a carpet with a short, dense pile and a stable backing that will not curl at the edges.

Build a Flat, Stable Base

A wobbly base ruins putts before you ever hit them. Use a plywood sheet or a rigid subfloor as your foundation, and check it with a 4-foot level in both directions. Aim for no more than about 1/8 inch of variation across the whole surface. Shim low spots with thin wood or foam before you lay anything on top.

Lay and Secure the Turf

  1. Unroll the carpet and let it sit flat for a few hours so it relaxes.
  2. Trim the edges with a sharp utility knife, keeping cuts straight.
  3. Secure the carpet to the base with double-sided tape or a light adhesive, working from the center outward.
  4. Press out air bubbles with a rolling pin or a heavy roller.

Add a Hole, Edging, and Practice Aids

Cut the cup opening to the standard 4.25-inch diameter, then insert a cup liner so the ball drops cleanly and the hole holds its shape. A simple fringe or border around the edge keeps the carpet from fraying and gives you a visual boundary for your aim.

Alignment aids make the green more useful. Setting two sticks on the carpet to form a gate or a straight line helps you groove a square face at impact. How to Set Up Alignment Sticks for Putting: A Step-by-Step Guide shows how to place them for consistent practice.

Practice Routines That Make the Green Worth Building

A green is only as good as the work you do on it. Try a few simple drills. Place tees at 3, 6, and 9 feet from the hole and make five in a row at each distance. Then practice lag putts from 20 to 30 feet, aiming to leave the ball inside a 3-foot circle around the cup. Drills with Alignment Sticks: 8 Putting and Chipping Drills That Save Strokes lists additional drills you can run on the same surface.

  • Indoor putting green carpet: a dedicated turf built for indoor speed and roll gives the most realistic feel. View on Amazon
  • Alignment sticks: they help you check your stroke path and face angle without needing a coach. View on Amazon
  • Putting cup liner: it keeps the hole crisp and the ball dropping consistently. View on Amazon

Common Mistakes

  • Skipping the level check. Even a small slope will push every putt to one side.
  • Using carpet that is too thick. A long pile slows the ball and distorts your speed feel.
  • Cutting the hole too large or too small. Stick to the 4.25-inch standard.
  • Laying carpet without letting it relax first, which causes ripples later.
  • Practicing only short putts. Include lag work to train distance control.

FAQ

How big should an indoor putting green be?

Most home setups range from about 6 to 10 feet long and 3 to 4 feet wide. Choose the largest size your room allows while still leaving clearance for a full stroke.

Can I build a putting green without special carpet?

You can, but standard carpet has a long pile and uneven grain that will affect roll. Dedicated putting green turf produces a more realistic speed and line.

Do I need to level the floor before installing turf?

Yes. A flat base is essential, and any dip or ridge will change the path of your putts. Check with a level and shim low areas before laying the surface.

Conclusion

To make an indoor putting green, focus on a flat base, a true-rolling surface, and a correctly sized hole. Add alignment aids and a simple drill routine, and you have a setup that improves your stroke every week. Keep the surface clean and check it periodically so it stays level and consistent.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Graham Fisher
Graham Fisher

Graham Fisher writes reviews and buying guides for Putting For Par.