We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Forb Indoor Putting Green: How to Choose and Set One Up for Home Practice

Learn what a forb indoor putting green is, how to pick the right size and surface, and how to set one up for accurate home putting practice.

Updated November 2026

A forb indoor putting green is a practice surface built for rolling putts across a flat, consistent mat at home. This guide explains what the term generally refers to, how to judge whether a green will help your stroke, and how to set one up so the practice actually transfers to the course. Follow the steps below and you will end up with a green that rewards good mechanics instead of hiding bad ones.

What a Forb Indoor Putting Green Is Used For

Most indoor greens are designed to train three things: stroke path, face angle at impact and distance control. A forb indoor putting green, like other home surfaces, works best when it gives you a predictable roll so your feedback comes from your stroke rather than from bumps, seams or uneven pile. If you are new to home putting surfaces, the overview in Building Indoor Putting Green at Home: 7 Best Kits Compared (2026) explains the main construction types you will encounter.

Shopping for one? See our guide: 7 Best Portable Putting Green Indoor Options for Home Practice (2026).

Step 1: Choose the Right Size and Length

Measure the room before you shop. Most players find that a minimum of 3 feet of clear space behind the ball and a few feet on each side gives enough room for a full, unrestricted stroke. Length matters more than width for distance work, so aim for at least 10 feet of usable rolling length if you want to practice lag putts. Shorter mats are fine for short-putt drills, but they will not teach you pace.

Step 2: Evaluate the Surface and Stimp Feel

Surface speed affects how much your mistakes show up. Slower surfaces reward a firm stroke, while faster ones expose any deceleration. Look for a surface with consistent pile direction and no visible seams where the ball could catch. Owners often report that a surface with too much nap makes the ball drift, so test a sample roll before committing if you can. For more on surface options, see Indoor Putting Green Carpet: How to Choose and Install One (Step-by-Step).

Step 3: Set Up the Green Correctly

  1. Clear the floor and remove any debris, since even small particles will deflect the ball.
  2. Lay the surface flat and secure the edges so the mat does not shift when you putt.
  3. Check level with a small bubble level or by rolling a ball from several starting points. Adjust any low spots with shims under the base.
  4. Place alignment markers at the cup and at 3, 6 and 10 feet so you can track starting line and speed.
  5. Set a target cup or hole that matches your intended practice distance.

If you plan to use alignment aids alongside the green, How to Set Up Alignment Sticks for Putting: A Step-by-Step Guide covers placement in detail.

Step 4: Build a Simple Practice Routine

Start with a 3-foot drill to build confidence, then move to 6 feet and 10 feet. Hit 10 putts at each distance, track how many finish inside a 6-inch circle around the cup, and repeat the routine three times a week. Accuracy at short range carries directly to the course, so do not skip it in favor of long putts.

Tools You Will Need

  • A level or bubble tool for setup checks
  • Tape or chalk for marking distances
  • Two or three alignment sticks or lines
  • A pack of practice balls with consistent weight

Common Mistakes to Avoid

  • Setting the green on an uneven floor, which teaches you to compensate for slope that does not exist on the course.
  • Practicing only from one spot, which hides aim problems.
  • Making the surface too short for the distances you actually face on the course.
  • Ignoring ball speed and only focusing on whether the putt drops.
  • Skipping a level check after moving the green, since small shifts change the roll.
  • Bubble level for setup: A compact level helps you confirm the surface is flat before every session. View on Amazon
  • Alignment sticks: Placing two sticks along your target line makes stroke path easy to check. View on Amazon
  • Putting practice balls: Consistent balls produce a more reliable roll test after test. View on Amazon

FAQ

Do I need a special mat for a forb indoor putting green?

Not necessarily. Any flat, low-pile surface that rolls the ball consistently will work for basic practice. A purpose-built green usually gives a more realistic speed and cup fit.

How often should I check the surface level?

Check it whenever you move the green or after a few weeks of use, since floors and bases can shift. A quick roll test from several spots is enough to catch problems.

Can I practice distance control on a short green?

You can practice short-range speed, but a longer surface gives better feedback for lag putts. If space is limited, use marked lines at 3, 6 and 8 feet to approximate longer distances.

Conclusion

A forb indoor putting green is only as useful as the setup behind it. Choose a size and surface that match your practice goals, level it carefully and follow a repeatable routine. Consistent sessions on a true surface will show up in your scoring faster than any single practice day.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Graham Fisher
Graham Fisher

Graham Fisher writes reviews and buying guides for Putting For Par.