We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Two Way Chipper Club: How to Use One for Better Short Game Shots

Learn how a two way chipper club works, when to use each face, and how to hit cleaner chips, pitches and bump-and-runs around the green.

Updated November 2026

A two way chipper club gives you two different striking faces in one head, so you can handle a bump-and-run on one side and a higher, softer chip on the other. This guide explains how each side works, how to set up your stance and strike for both, and the mistakes that cost strokes around the green. If you are new to this type of club, start with the basics in Two-Way Chipper Golf Club: How It Works and When to Use One.

Understand What Each Face Does

Most two way chipper designs pair a low-loft, putter-like face with a higher-loft face, often in the 20 to 30 degree range on the lofted side. The flatter side is for shots where you want the ball to roll out quickly, while the lofted side produces a higher trajectory with more spin and less roll. Check the loft markings or manufacturer specs before your first round so you know exactly what you are holding.

Shopping for one? See our guide: 6 Best Golf Chipper Clubs for Short Game Control (2026).

The practical difference is simple. Use the low face when the ball has room to run and the green is firm. Use the lofted face when you need height to clear rough, a bunker lip or a tight pin position.

Set Up Your Stance and Strike

Stand with your feet about six inches apart, weight slightly favoring your lead side, and the ball positioned just back of center. Keep your hands ahead of the ball at address so the shaft leans toward the target. This forward shaft lean keeps the leading edge from digging and promotes a clean strike.

  1. Pick the face that matches your target landing spot and rollout plan.
  2. Set the clubface square to your target line and grip with light pressure.
  3. Keep your shoulders moving together, with a short backswing about the length of your lead arm swing.
  4. Accelerate through the ball, letting the club finish low on the target side.

Match the Face to the Shot

For a standard chip with plenty of green to work with, the low face gives you the most predictable roll. Land the ball about one-third of the way from your target, and let it release. Keep your stroke length consistent so the distance comes from the length of the swing, not from forcing the club.

For a higher shot over an obstacle, switch to the lofted face. Land the ball closer to the hole, since it will check more and roll less. Expect the ball to stop faster than you think, and take one extra club of carry into account when you read the lie.

Adjust for Lie and Grass

Tight lies favor the lower face because the club can slide under the ball cleanly. In thicker grass, the lofted face helps the club get through without snagging. Avoid trying to scoop with either face; let the loft do the work.

Practice Drills That Build Consistency

Hit ten shots from the same spot with each face, aiming for a landing area the size of a towel. Track how many finish within a putter length of the hole. Then move to a second position and repeat. This simple routine teaches you the distance and roll for each side far faster than hitting random shots.

Common Mistakes

  • Choosing the wrong face because you did not check the loft markings before the round.
  • Playing the lofted side with a putting-style stroke, which often leads to a thin strike.
  • Landing the ball too close to the hole when using the low face, causing it to run past.
  • Decelerating into impact, especially on short pitches where confidence fades.
  • Ignoring lie conditions and using the same setup from a tight lie and a fluffy one.
  • Practice chipping net: A target net lets you see where your ball lands and rolls, which makes face selection easier to judge. View on Amazon
  • Chipping training mat: A synthetic mat lets you repeat the same stroke and track strike quality at home. View on Amazon
  • Short game target markers: Flags or markers help you judge landing zones on the range. View on Amazon

FAQ

Two-sided clubs are generally allowed under the Rules of Golf as long as the club meets the standard requirements for shape, dimensions and face condition. Check your local rules or the Rules of Golf for specifics before competition. If you are unsure, consult a rules official.

Which face should a beginner use first?

Most beginners do better starting with the low face because the ball rolls predictably and the stroke resembles putting. Once you are comfortable with contact, add the lofted face to your practice.

How far should I practice each face?

Plan at least 20 to 30 minutes per session, split evenly between both faces. Consistent short sessions build feel faster than one long session.

Conclusion

A two way chipper club rewards you for matching the right face to the right shot. Learn the loft difference, set up with forward shaft lean, and drill both sides until the roll and height feel predictable. Your scores around the green will improve as your choices become automatic.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Putting For Par.