We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Heel Shafted Mallet Putter: A Step-by-Step Guide to Choosing One

Learn what a heel shafted mallet putter does, how to check fit and face balance, and which setup suits your stroke. Read the step-by-step guide.

Updated November 2026

A heel shafted mallet putter attaches its shaft at the heel of the head rather than the center, which changes how the face rotates through the stroke. This guide explains what that design does, how to check whether it suits your stroke, and what to look for when you buy one. The goal is a putter that keeps the face square at impact on the lengths you actually face.

What a Heel Shafted Mallet Putter Does Differently

When the shaft joins the head at the heel, the head tends to swing open and closed more on its own. Many golfers with a slight arc in their stroke find this matches their natural path. Center shafted designs, by contrast, keep the face tracking more directly. Neither is universally better; the question is how your stroke moves the face.

Shopping for one? See our guide: 4 Best Center Shafted Mallet Putter Covers for DF3 Putters (2026).

Heel shafted mallets also tend to feel heavier at the toe in the hands, which some players find useful for consistent tempo. Owners often report that the feel at impact is firmer than a center shafted model, so test a few before deciding.

How to Check Your Stroke Before Buying

Start by finding out how your face moves. Use a mirror or a phone camera set at face level, and putt five to ten balls from six feet. Look at the club from the rear: if the face points left of your target at the start of the stroke and rotates through impact, you likely have a strong arc that a heel shafted design can complement.

  1. Set up a target line on the carpet or a putting mat, about six feet long.
  2. Putt ten balls and record whether they start left, right or on line.
  3. Film from behind the ball at 30 inches off the ground.
  4. Note whether the face is open, closed or square at impact.
  5. Choose a heel shafted model if the face opens and closes noticeably in your stroke.

Choosing Head Weight, Loft and Length

Once the shaft position fits your stroke, match the head to your setup. Most putters are built to a standard length of about 34 to 35 inches, but you should stand over a ball in your normal posture and check that your eyes sit roughly over the ball-to-target line. A putter that is too long or too short will pull your posture off, and that alone can push your strokes offline.

Head weight affects how much work your hands do. A heavier head tends to produce a smoother, pendulum-like motion, while a lighter head often suits a more wristy stroke. Manufacturers typically specify head weight in grams, so compare that number across models rather than relying on feel alone.

Stroke type Likely fit
Strong arc, face opens and closes Heel shafted mallet
Straight back and through, face stays square Center shafted mallet
Short, firm stroke with minimal rotation Blade or compact mallet

Practice Drill to Confirm the Fit

After you pick a putter, spend ten minutes on a gate drill. Place two tees just wider than your putter head, about six inches in front of the ball and aimed at the hole. Stroke ten putters through without touching the tees. If you clip a tee on the way back or through, adjust your posture or consider a different shaft position.

Common Mistakes

  • Buying based on looks alone without testing the shaft position on a real stroke.
  • Ignoring length, which changes eye line and alignment.
  • Switching designs before giving a new putter at least 100 practice putts.
  • Assuming heel shafted means more forgiving; forgiveness depends on head design and face quality too.
  • Skipping a check on the carpet or mat, where small alignment errors show up quickly.

A simple gate drill set makes the fit check quicker and more objective. Use it before and after you change putters.

  • Putting gate or alignment tees: help you confirm the stroke path clears the head. View on Amazon
  • Putting mat with marked lines: gives you a consistent target and distance for testing the face angle over ten balls. View on Amazon

FAQ

Is a heel shafted mallet putter better for beginners?

Not necessarily. Beginners often do better with a stable, straight-back stroke, which a center shafted design may suit more easily. Test both before choosing.

How do I know if my stroke needs a heel shaft?

If your face opens and closes noticeably during the stroke on video, a heel shafted model may match your path better. A square-faced stroke usually favors a center shaft.

Does a heel shafted putter improve accuracy on its own?

No. Accuracy depends on your setup, stroke and practice. The shaft position only helps if it fits how your face moves.

Conclusion

A heel shafted mallet putter suits golfers whose face rotates through the stroke, and you can confirm that with a simple video check. Match the head weight and length to your posture, then run a gate drill before committing. Test before you buy, and give the putter enough practice to show its real strengths.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Putting For Par.