Ping Sigma 2 Mallet Putter Headcover Black/White Blue: Fit, Fitment and Care
Find out how to choose a Ping Sigma 2 mallet putter headcover in black/white blue, check fit on your putter, and keep it looking sharp.
Updated November 2026
A Ping Sigma 2 mallet putter headcover in black/white blue protects your putter head from dings and scratches while making it easy to spot in your bag. The key to a good result is confirming that the cover matches your specific Sigma 2 model, pulling it on and off without stressing the seams, and cleaning it so the white and blue panels stay bright. This guide walks through each step.
Confirm the Headcover Matches Your Sigma 2 Putter
Ping’s Sigma 2 line includes several mallet shapes, and headcovers are typically sized to a specific head profile rather than a universal fit. Before you buy, check the head’s depth, width and heel-toe length against the cover’s listed dimensions. Manufacturers specify these measurements on their product pages, so compare them directly rather than guessing from the photo.
Shopping for one? See our guide: Ping Putter Headcover Mallet: 5 Best Picks for Every Stroke (2026).
Also check the attachment method. Most Ping mallet covers use a fabric tab or loop around the shaft, but some rely on a snug stretch fit. If your putter has an unusual neck or a counterbalance, confirm the cover’s opening will clear it.
Test the Fit Before Your Next Round
A headcover that is too tight can crack the paint near the hosel, and one that is too loose will slide off mid-walk. Slide the cover on with the putter face down, then rotate the head gently. The cover should stay put without bunching, and the logo panel should sit where you expect.
- Place the putter on a flat surface and line up the cover’s opening with the toe.
- Work the cover over the head, keeping the shaft centered in the opening.
- Tug the cover lightly in each direction to confirm it holds.
- Check that the shaft sleeve or tab lines up with the shaft and does not pinch.
Care for the Black, White and Blue Panels
Black/white blue combinations show dirt quickly, especially the white sections. Grass stains and sand grit collect in the fabric, and repeated contact with wet grass can dull the blue over time. Shake the cover out after each round and spot-clean with a soft brush and mild soap. Let it air-dry away from direct heat, since high heat can warp the shape.
Avoid machine washing unless the manufacturer says it is safe. Owners often report that the fabric shrinks or the stitching loosens after aggressive washing.
Quick Care Checklist
- Brush off loose sand and grass after every round.
- Spot-clean white panels with a soft cloth and mild soap.
- Air-dry fully before storing the cover on the putter.
- Inspect the attachment tab for fraying every few months.
Common Mistakes to Avoid
- Buying by color alone without checking the Sigma 2 model’s head dimensions.
- Forcing an oversized cover onto a compact head, which stretches the seams.
- Storing the putter with a damp cover, which encourages odor and staining.
- Leaving the cover on the putter in a hot car, where the fabric can fade.
Recommended Gear
A soft-bristle detail brush helps lift grit from the stitching without fraying the fabric. View on Amazon
A microfiber towel is useful for drying the cover and the putter face after wet rounds. View on Amazon
FAQ
Will a Ping Sigma 2 headcover fit every Sigma 2 putter?
Not necessarily. Sigma 2 putters come in several head shapes, so compare the cover’s listed dimensions with your putter’s head before buying.
Can I machine wash a black/white blue headcover?
Only if the manufacturer says it is safe. Hand washing with mild soap is the lower-risk choice for keeping the colors and stitching intact.
How do I stop my headcover from falling off during a round?
Make sure the attachment tab or loop is snug around the shaft and that the cover sits fully over the head. A fit that holds when you tug gently usually stays put on the course.
Conclusion
Matching the cover to your exact Sigma 2 head, checking the fit before you tee off and keeping the panels clean will get you the most from a black/white blue headcover. Routine brushing and proper drying extend its life. For the best fit on your specific putter, check the manufacturer’s sizing details before you order.
Related reading
- Ping Sigma G Mallet Putter Headcover Black/silver: A Practical Guide (2026)
- Small Mallet Putter Headcover: How to Choose the Right Fit (2026)
- Scotty Cameron Mallet Putter Headcover: 5 Best Picks for Every Stroke (2026)
- Odyssey White Hot RX Mallet Putter: 5 Best Options Compared (2026)
- Mid Mallet Putter Headcovers: 6 Fit Factors That Matter (2026)
- Mallet Putter Headcover Magnetic: How to Choose and Use One (2026)
Ready to choose one?
