We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Putting With a Mallet Putter: 6 Steps to Better Distance and Alignment

Learn putting with a mallet putter: how to set up, align, and control distance with a mallet. Practical steps, drills, and common mistakes to fix.

Updated November 2026

Putting with a mallet putter comes down to three things: square alignment, a stable stroke that keeps the face on line, and distance control built from consistent tempo. This guide walks through setup, aiming, and a simple drill routine so you can make the switch with confidence. If you are still deciding between head shapes, Mallet Putter vs Blade: Which Should You Choose? (2026) covers the trade-offs.

Set Up for a Mallet Putter

Mallet heads are larger and usually weighted toward the perimeter, which makes them more forgiving on off-center hits. That extra mass also means you should avoid forcing the stroke with your hands. Start with a relaxed grip, eyes roughly over the ball or just inside it, and your weight balanced evenly between both feet.

Shopping for one? See our guide: 6 Best Mallet V Blade Putters for Every Stroke (2026).

Many mallets have a larger sole and different balance than blades. Check how the putter sits at address. The sole should rest flat on the turf with the shaft leaning slightly toward the target, not hanging or tilted up on the heel or toe.

Align the Face and Body

Alignment matters more with a mallet because the wider head makes it easy to misjudge the face angle. Use the alignment lines or sight line on the top of the putter as your reference. Place a ball on a line of sight, then square the putter face to the target line before you settle in.

Once the face is square, align your shoulders and feet parallel to that target line. A simple check: lay a club on the ground pointing at the hole and confirm your feet and shoulders run parallel to it.

Build a Repeatable Stroke

A mallet works best with a stroke that moves mostly on the arc of your shoulders, with minimal wrist action. Keep the putter head low and close to the ground through impact, and let the head swing back and through with equal length. Equal backswing and follow-through length is the most reliable way to keep the face square.

For distance, tempo beats force. Count “one, two” on a short putt, with the backswing as the first beat and the follow-through as the second. Use the same count for longer putts but let the backswing get longer, not faster.

Control Distance With a Simple Drill

  1. Place three tees in a line, starting about three feet from the hole and spacing them one foot apart.
  2. Putt to a target about 10 feet away and try to stop each ball within a foot past the hole.
  3. Repeat with eight balls. Track how many finish inside the target zone.
  4. Increase the distance by three feet each round and keep the same tempo count.

This drill trains the feel for the stroke length a mallet needs. Most players find the heavier head rewards a smooth, slightly longer backswing for the same distance a blade would cover with less motion.

Common Mistakes to Avoid

  • Gripping too tightly, which can make the wider head feel harder to control.
  • Letting the wrists break down, which opens or closes the face on the way through.
  • Checking the hole too early, which pulls your head up and disrupts the stroke.
  • Using a rushed tempo on long putts instead of a longer, unhurried backswing.
  • Skipping alignment checks, since a mallet can hide a slightly open or closed face at address.

A simple alignment mirror or stick helps confirm your face and shoulder alignment before you putt, which matters more with a wide mallet head. View on Amazon

A putting mat with a stimp-speed surface gives you a consistent place to practice the distance drill indoors. View on Amazon

A headcover that fits your mallet protects the face and keeps your practice routine consistent. You can compare options in Small Mallet Putter Cover: 7 Best Picks for Every Stroke (2026).

FAQ

Do I need a different stance for a mallet putter?

Most players use the same basic stance, but the wider head may encourage a slightly more upright setup. Check that your eyes are over or just inside the ball and that the sole sits flat.

Is a mallet easier to putt with than a blade?

Many golfers find mallets more forgiving on off-center strikes because of the perimeter weighting. Forgiveness does not replace a sound stroke, so alignment and tempo still matter.

How long should I practice before a round with a mallet?

Ten to fifteen minutes of the distance drill plus a few short alignment checks is enough to get a feel for the head. Adjust your routine if your stroke feels different on the course.

Conclusion

Putting with a mallet putter rewards square alignment, a relaxed grip, and a stroke with equal backswing and follow-through. Use the distance drill regularly to build feel for longer and shorter putts. Stick with one setup for several rounds before changing anything, since consistency matters more than any single adjustment.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Putting For Par.