We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Putter Grips Golf Galaxy: A Step-by-Step Guide to Choosing the Right Grip (2026)

Putter grips golf galaxy shoppers often ask where to start. Learn how to choose size, shape, and material, and how to fit a grip to your stroke.

Updated November 2026

Putter grips golf galaxy searches usually come from golfers who want a clear way to pick a grip that suits their hands and stroke, whether they shop in person or online. This guide walks you through the decisions that matter most: grip size, shape, material, and installation. By the end, you will know which measurements to take, which features to prioritize, and how to avoid the mistakes that leave a putter feeling wrong even when the head is perfect.

Why Your Putter Grip Matters More Than Most Golfers Think

A putter grip is the only part of the club you touch on every single stroke, and it sends constant feedback to your hands about face angle, tension, and rhythm. Even small changes in diameter or texture can shift how tightly you hold the club and how much your wrists move. Many golfers spend hours choosing a head shape and then grab whatever grip came on the club, which is a missed opportunity. Shops that carry putter grips, including specialty fitting centers often referenced in searches for putter grips golf galaxy, typically start with a hand-size and stroke conversation for exactly this reason.

Step 1: Measure Your Hands and Grip Pressure

Before you compare products, take a few measurements so you know your starting point. Hand size affects which grip diameter feels natural, and grip pressure determines whether you need extra tackiness or a firmer surface.

  1. Measure your palm from the crease at the base of your fingers to the base of your palm, then measure around your fingers at the middle knuckle.
  2. Hold your putter in your normal address position and squeeze at a relaxed 3 out of 10 pressure. Ask a friend to watch your knuckles. White or tense knuckles usually mean you hold too tightly.
  3. Note whether your stroke comes mostly from the shoulders or the wrists. Shoulder-driven strokes tend to suit larger grips, while wrist-driven strokes often feel better on standard or midsize diameters.
  4. Write down your current grip diameter if you know it. Use a caliper or a ruler measured across the grip at its widest point.

Step 2: Choose the Right Grip Size

Grip size is the single biggest factor for most golfers. Putter grips are commonly sold in standard, midsize, oversize, and jumbo diameters, and the difference between them is more noticeable than most people expect. A grip that is too thin encourages a tight, grabbing hold, while one that is too thick can make the hands feel disconnected from the face.

Grip Category Typical Diameter (approx.) Best Suited For
Standard About 0.8 to 0.9 inches Golfers with average hands and a light grip pressure
Midsize About 0.9 to 1.0 inch Players who grip firmly or want a bit more stability
Oversize About 1.0 to 1.1 inches Golfers with larger hands or those who want to quiet wrist action
Jumbo About 1.1 inches and up Players with significant wrist movement or arthritis-related grip concerns

Diameter figures vary by brand, so always compare the manufacturer’s specification rather than relying on category names alone. If you are between sizes, a midsize often serves as a safe middle ground. If you have a health condition affecting your grip, such as arthritis, consult a physician or occupational therapist before making changes.

Test Before You Commit

Whenever possible, hold a sample grip and make 10 to 15 slow strokes on a carpet or mat. Pay attention to whether your hands stay quiet and whether the face stays square at impact. If you feel your wrists flipping or your forearms tightening, the grip is probably the wrong size.

Step 3: Pick the Grip Shape and Profile

Once size is settled, look at shape. Round grips are the most common and allow the hands to rotate freely. Flat-sided or ribbed profiles give a visual reference for alignment and help some golfers keep the same grip position every time. Taper also matters. A reverse taper grip is thicker at the bottom, which can encourage a lighter, more relaxed top hand. A standard taper is thicker at the top and tends to suit golfers who want a more solid feel through the hands.

Match Shape to Your Stroke

  • Choose a round grip if you want freedom of rotation and a soft feel.
  • Choose a ribbed or flat-sided grip if you tend to twist the club or want a consistent visual cue.
  • Choose reverse taper if you feel tension in your top hand or tend to pull the stroke.
  • Choose standard taper if you prefer a firm lead hand and a more controlled release.

Step 4: Select the Material and Texture

Most putter grips are made from rubber or synthetic compounds, sometimes with a corded or tacky surface. Firmer materials hold their shape and resist wear, while softer compounds cushion the hands and can feel more responsive on short putts. Texture affects how much the hands grip. Smooth or lightly textured surfaces suit players with dry hands and light grip pressure. Heavily textured or corded surfaces help players whose hands get sweaty, though they can feel abrasive over long rounds.

Step 5: Install the Grip Correctly

Installation is where many otherwise good grips fail. A grip that slips, spins, or sits at the wrong angle will undo your choices. Work through these steps carefully.

  1. Gather a grip solvent or alcohol-based solution, a utility knife, a vise or clamp, and double-sided tape if your grip is a tape-on style.
  2. Remove the old grip by slicing it lengthwise with a utility knife, taking care not to scratch the shaft.
  3. Clean the shaft with a rag and a little solvent so no old adhesive remains.
  4. Apply the tape or solution evenly along the shaft and slide the grip on quickly, aligning the logo or ribs to your target line.
  5. Allow the grip to dry for the time the manufacturer specifies, usually several hours, before hitting any putts.

Align the grip so any flat side or ribbing sits in the position you practice with. Crooked grips create a crooked feel even when the stroke is sound.

Common Mistakes to Avoid

  • Choosing size by how the grip looks rather than how it feels in your hands.
  • Ignoring grip pressure and buying a size without testing your tension level.
  • Installing the grip in a hurry and skipping the drying time.
  • Switching size and shape at the same time, which makes it impossible to tell which change helped.
  • Assuming a tour player’s grip will fit your hands. Pro preferences depend on their own size and stroke.

Tips for Getting the Most From a New Grip

Give any new grip at least two weeks of regular practice before judging it. Your hands need time to adapt, and early discomfort often fades. Keep a simple log of your putting results, noting make percentage from 3 to 6 feet and lag distance control. This makes it easier to see whether the grip is helping or whether you should try another size. Replace grips when they become slick, cracked, or hard, since worn grips change the feel and can cause inconsistent hold.

  • Grip solvent kit: A solvent designed for putter grip installation helps the grip slide on smoothly and cure without leaving residue on the shaft. View on Amazon
  • Grip vise or clamp: A bench-mounted vise keeps the shaft steady during removal and installation, which makes alignment far easier. View on Amazon
  • Utility knife and grip removal tool: A sharp, sturdy blade lets you slice off old grips cleanly without scoring the shaft. View on Amazon
  • Double-sided grip tape: Tape-on grips rely on this adhesive, so choose a tape designed for golf grips to keep the grip secure through repeated use. View on Amazon

For more context on how grips pair with different putter styles, see Golf Putter Blade vs Mallet (2026): Which Is Better for Your Stroke? and 6 Best Golf Putter Grips for Better Feel (2026). Golfers interested in larger diameters can compare options in 4 Best Golf Putter Grips Oversizes for Better Feel (2026), while those leaning toward a midsize feel may find 6 Best Midsize Putter Golf Grips for Better Feel (2026) useful. If you are curious about a specific tour choice, Scottie Scheffler Putter Grip Golf Pride: What He Uses and How to Get It offers a closer look.

FAQ

What size putter grip should I buy?

Most golfers start with a standard or midsize grip. Measure your palm and test a few diameters on a mat. Choose the size that lets your hands stay quiet without feeling disconnected.

How do I know if my putter grip is too thin?

A grip that is too thin often causes tight knuckles, a grabbing hold, and wrist flipping at impact. If you notice these signs, try a larger diameter.

Can I install a putter grip myself?

Yes, with basic tools and patience. Use a vise, a solvent or tape, and allow full drying time. If the shaft is valuable or you are unsure, a club fitter or repair shop can handle it.

How long does a putter grip last?

Lifespan depends on how often you play and how you store your clubs. Replace a grip when it feels slick, hard, cracked, or inconsistent in texture.

Do I need a reverse taper putter grip?

Not necessarily. Reverse taper suits golfers who feel tension in the top hand or want a lighter lead grip. Standard taper suits those who prefer a firm, stable hold.

Does grip texture help on sweaty days?

Heavier texture or corded surfaces can improve hold when hands get damp, though some golfers find them abrasive over long rounds. Test before committing.

Should I change grip size if I have hand pain?

Consult a physician or occupational therapist before making changes, especially for arthritis or similar conditions. Larger grips may reduce strain for some players, but professional guidance is important.

Conclusion

Choosing a putter grip comes down to measuring your hands, testing diameter and shape, matching material to your conditions, and installing the grip carefully. Work through these steps in order and change one variable at a time so you can see what actually helps. A well-fitted grip will not fix a poor stroke, but it will make a good stroke feel more consistent, and that consistency is what saves strokes on the green.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Putting For Par.