Center Shafted Mid Mallet Putter Cover: How to Choose and Fit One (2026)
Learn how to choose and fit a center shafted mid mallet putter cover, with sizing checks, shaft-fit tips and common mistakes to avoid before you buy.
Updated November 2026
A center shafted mid mallet putter cover is a headcover designed for a mid-sized mallet head with the shaft attached at the center of the head. Getting the right one means matching three things: the head size, the shaft position, and how the cover secures to the shaft. This guide walks through each check so the cover fits snugly, stays on during play, and protects the putter face without rubbing off the finish.
Step 1: Confirm Your Putter Is a Center Shafted Mid Mallet
Start by identifying the head style. Mid mallets sit between compact blades and full-sized mallets, typically with a moderate front-to-back depth and a flange or sightline that runs close to the head’s center. A center shafted design connects the shaft at the midpoint of the head’s top line, which is different from heel-shafted or plumber’s-neck designs. Measure the head from heel to toe and from face to back. If the head is noticeably larger than a blade but not oversized, you are likely in mid mallet territory.
Step 2: Check Head Dimensions and Shaft Position
Cover fit depends on the head footprint and where the shaft exits the head. Use this quick reference:
| Measurement | What to Record | Why It Matters |
|---|---|---|
| Heel-to-toe length | Widest point of the head | Determines whether the cover stretches or bunches |
| Face-to-back depth | Front edge to rear edge | Affects how far the cover sits over the back of the head |
| Shaft exit point | Center, slightly toward heel or toe | Sets the location of the shaft opening or Velcro tab |
| Hosel diameter | Where the shaft meets the head | Impacts whether a strap or cinch will stay put |
Manufacturers typically list head dimensions and fit notes in their product descriptions. If a cover lists a specific putter model, compare its stated fit to your measurements before ordering.
Step 3: Evaluate Closure and Shaft Opening
A center shafted cover needs a secure closure at the shaft. Look for three features:
- Shaft opening placement: The opening should align with the center exit point, not drift toward the heel or toe.
- Closure type: Magnetic, hook-and-loop, or snap closures each hold differently. Magnetic closures are common on mid mallets but can loosen if the magnets are weak.
- Stretch and rebound: Neoprene and similar stretch materials conform to the head shape. Stiffer materials may need a more precise size match.
Test the fit by slipping the cover over the head with the shaft in place. It should seat flat against the face and back without gaps larger than a finger width.
Step 4: Confirm Fit Before Regular Use
Once the cover is on, give the putter a few gentle swings with the cover attached to confirm it stays secure. Check that the shaft opening doesn’t pinch the hosel and that the cover doesn’t slide when you lift the bag. A cover that shifts during transport will eventually expose the face to scuffs or scratches. If your putter has an unusual neck or shaft offset, consider checking with the cover maker or a club fitter before committing to a particular design.
Common Mistakes
- Choosing by brand alone without checking head dimensions.
- Ignoring the shaft exit point and assuming any center opening will work.
- Stretching a snug cover over a larger head, which can warp the closure.
- Leaving the cover on a damp putter, which can trap moisture against the finish.
- Using a cover that is too loose, allowing it to slide during the swing or while walking.
Recommended Gear
- Stretch-fit neoprene covers: These conform to varying mid mallet shapes and tend to hold their fit over time. View on Amazon
- Magnetic-closure covers: Strong magnetic closures keep the cover in place during carrying and transport. View on Amazon
Related Reading
For more options, see Center Shafted Mallet Putter Headcovers: How to Choose and Fit One (2026) and Mid Mallet Putter Headcovers: 6 Fit Factors That Matter (2026). If you already own a cover that no longer fits, Center Shaft Mallet Putter Cover Replacement: A Step-by-Step Guide (2026) covers the swap process. Shoppers comparing specific options can also look at 4 Best Center Shafted Mallet Putter Covers for DF3 Putters (2026) and 6 Best Mid Mallet Putter Covers for Every Golfer (2026).
FAQ
How do I know if my putter is a center shafted mid mallet?
Look for a mid-sized head with the shaft attached near the center of the top line rather than at the heel. Measure heel-to-toe and face-to-back depth and compare them to the manufacturer’s listed dimensions.
Will a center shafted cover fit a heel-shafted putter?
Usually not well. The shaft opening sits in a different location, so the cover may bunch, gap, or fail to secure at the hosel.
Should I remove the cover when the putter is wet?
Yes. Let the putter dry before covering it, since trapped moisture can affect the finish over time.
Conclusion
A well-fitting center shafted mid mallet putter cover depends on matching head dimensions, shaft exit point, and closure type. Measure first, test the fit with the shaft in place, and confirm it stays secure before heading to the course. Taking these steps keeps your putter protected and your setup consistent round after round.
Related reading
Ready to choose one?
