We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Cipton Golf Chipping Net Assembly Instructions: Step-by-Step Setup

Follow these cipton golf chipping net assembly instructions to set up your net safely, get the frame square, and start short game practice in under 30 minutes.

Updated November 2026

Cipton golf chipping net assembly instructions come down to three jobs: build the frame square, anchor it so it stays put, and position the net so your chips land where they should. Work through the steps in order and you can have a usable practice station in about half an hour. Check the parts list against the box before you start, because a missing clip or pole section is much easier to catch early.

Before You Start: Parts and Space

Lay out every piece on a flat surface and confirm you have the frame sections, the netting, the stakes or base feet, and any hardware. Choose a spot with at least 10 feet of open space behind the net so you are not chipping into a fence, wall or window. Clear out stones, sprinklers and anything else that could trip you or get damaged.

Shopping for one? See our guide: 5 Best Chipping Nets for Golf to Sharpen Your Short Game (2026).

  • All frame poles and connectors
  • Netting panel and any attachment clips or cords
  • Stakes, base feet or weights
  • A tape measure and a small level, if you want a square setup

Step-by-Step Assembly

  1. Connect the frame sections. Join the poles at each connector until they click or lock. Assemble the two side frames first, then join them with the top crossbar.
  2. Check the frame is square. Measure the diagonals from corner to corner. When the two measurements match, the frame is square and the netting will hang evenly.
  3. Attach the netting. Hook or clip the netting along the top and sides, starting at the center and working outward so the material stays taut and even.
  4. Secure the base. Drive the stakes through the base feet or set the weights, depending on your model. Make sure each foot sits flat on the ground.
  5. Test the stability. Gently push the frame from the front and sides. It should flex slightly and return to position without shifting or tipping.

Positioning the Net for Chipping Practice

Once the frame is up, set your practice distance. Most short game drills work well with the ball placed about 10 to 20 feet from the net, which gives you room to make a full chipping motion without hitting the frame. Keep the net angled slightly toward you if the model allows it, so the ball rebounds to a predictable spot rather than skipping away.

Check the owner’s manual for the manufacturer’s recommended distance and any wind or ground-clearance limits. Conditions change, so re-check stakes and anchors after strong winds or heavy use.

Common Mistakes

  • Skipping the diagonal measurement, which leads to a crooked frame and uneven netting.
  • Leaving the base feet unanchored on soft or sloped ground.
  • Standing too close to the net, which shortens your swing and can damage the netting.
  • Forcing connectors together instead of checking that each section is aligned.
  • Setting up in a windy spot without staking or weighting the base.

A few add-ons can make setup and practice easier. Use these as optional upgrades rather than requirements.

  • A chipping mat: A mat under your feet protects the turf and gives you a consistent lie for each rep. View on Amazon
  • Ground stakes or weights: Extra anchoring keeps the frame steady on lawns and patios. View on Amazon
  • A small level: A torpedo level helps you confirm the frame sits plumb before you start hitting. View on Amazon

FAQ

How long does assembly usually take?

Most first-time setups take about 20 to 30 minutes, with the diagonal check and anchoring taking the most care. Setting up again later is usually much faster once you know the sequence.

Do I need to anchor the net if I only practice occasionally?

Yes. Even light breezes can tip an unanchored frame, and a falling frame can damage clubs or nearby objects. Anchor it every time.

What if a section doesn’t fit or lock properly?

Check that the sections are the correct pair and fully seated in the connector. If a part is bent or damaged, contact the manufacturer for a replacement rather than forcing it.

Conclusion

Following these cipton golf chipping net assembly instructions gives you a square, stable frame in one session. Take the time to check the diagonals and anchor the base, and your practice will be more consistent. Once it is set up, you can focus on your short game instead of troubleshooting the net.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Putting For Par.