We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Diy Home Golf Practice Net: Build One for Backyard or Garage Short Game Work

Learn how to build a diy home golf practice net with the right materials, size and backstop so you can practice chipping and pitching safely at home.

Updated November 2026

A diy home golf practice net gives you a safe, repeatable target for chipping, pitching and full swings without leaving the house. You can build one in an afternoon with lumber, netting and a few basic tools. This guide covers how to plan the size, choose materials, assemble the frame and set up a space where you can swing without risk.

Plan the Size and Location First

Before you buy anything, measure the space you have. Most short game practice needs a net roughly 7 to 10 feet wide and 6 to 8 feet tall, with at least 10 feet of open space in front for your stance and follow-through. For full swings with irons, you need much more room behind the net and a clear line of flight.

Check what is behind the net, too. Fences, windows, garage doors and neighbors’ property all need protection. If you are chipping into soft turf, a shallow sloped area behind the net helps stop balls from rolling back toward you.

Gather Materials and Tools

Most builds use the same basic supplies. Use this list to confirm you have everything before you start cutting:

  1. Pressure-treated 2×4 lumber for the frame (about 20 linear feet for a 7 x 6 foot net)
  2. Exterior deck screws or galvanized carriage bolts
  3. Heavy-duty golf netting, rated for impact, with a mesh no larger than about 1 inch
  4. Zip ties or grommets and a staple gun for attaching the netting
  5. Circular saw or miter saw, drill, tape measure and level
  6. Four ground stakes or a weighted base to keep the frame from tipping

Build the Frame and Attach the Netting

Cut and Assemble the Frame

Cut two vertical posts and a top rail, plus a bottom rail if you want a fully enclosed face. Assemble the frame on a flat surface, then check every corner with a square. Drive two screws at each joint to keep it rigid under repeated impact.

Stretch and Secure the Net

Pull the netting taut across the frame before fastening. Start at the center of each side and work outward so the tension stays even. Secure every 4 to 6 inches with zip ties or staples. Loose netting bounces balls back at you and wears out quickly.

Add a Backstop and Anchor the Frame

Golf balls hit hard, and a freestanding frame can shift. Anchor the base with stakes driven into the ground or add sandbags to the bottom rail. If you practice in a garage or near a wall, add a rear backstop panel or a dense fabric curtain to catch balls that pass through the mesh.

Common Mistakes to Avoid

  • Using lightweight garden netting that tears after a few dozen shots.
  • Skipping the backstop, which lets balls travel farther than you expect.
  • Building too small for your swing length, causing strikes on the frame.
  • Failing to anchor the base, so the frame tips after hard contact.
  • Practicing with a ball that is too hard for the net’s rating.

If you want a ready-made option to compare against your build, a Sklz Quickster net works as a clear reference point for size and target design. Check the frame, mesh and stability before you decide whether building or buying suits you better. View on Amazon

For a portable option that stores easily, a pop-up style net folds down when you are finished. This is useful if you share a garage or need to clear the space for other activities. View on Amazon

If you are still choosing between a homemade frame and a store-bought model, read Indoor Golf Chipping Net: 7 Best Picks for Home Short Game Practice for a comparison of setups that fit tight spaces, and Par From Home Chipping Net: Set Up a Backyard Short Game Practice for layout ideas.

FAQ

How big should a diy home golf practice net be?

A width of 7 to 10 feet and a height of 6 to 8 feet covers most chipping and pitching practice. Leave at least 10 feet of open space in front of the net for your stance.

What netting works best for a home golf net?

Choose heavy-duty golf netting rated for impact with a small mesh size. Lightweight garden netting tears quickly under repeated strikes.

Do I need a backstop behind the net?

Yes, especially in garages or near walls. A backstop catches balls that pass through the mesh and reduces the risk of damage or injury. Consult a professional if you are unsure about structural or safety requirements for your space.

Conclusion

A well-built diy home golf practice net gives you a dependable target for short game work at home. Plan the size around your space, use impact-rated netting and anchor the frame securely. With a backstop and proper spacing, you can practice safely and repeat your drills as often as you like.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Putting For Par.