We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Golf Bag Putter Holder Clip: How to Choose and Attach One (2026)

Looking for a golf bag putter holder clip? Learn how these clips work, what to check before buying, and how to attach one so your putter stays secure and easy t

Updated November 2026

A golf bag putter holder clip keeps your putter secured to the outside of your bag, so you can grab it between holes without digging through your stand bag or cart bag. This guide covers how these clips work, what to check before buying, and how to attach one so it holds firm during walking and riding. Most of the work comes down to matching the clip to your bag’s shaft diameter and your putter’s shape.

How a Golf Bag Putter Holder Clip Works

Most clips grip the putter shaft just below the grip, using a spring-loaded jaw, a rubber-lined clamp or a strap that wraps around the shaft. The base attaches to the bag’s exterior, usually on a side pocket, a strap or the top collar. Some designs sit flat against the bag, while others stand the putter up at an angle for quicker access. Because the clip carries the putter’s weight and absorbs movement, the grip point matters more than the mounting hardware.

Shopping for one? See our guide: 4 Best Putter Holders for Golf Bag: Picks for Easy Access (2026).

Step-by-Step: Choosing the Right Clip

  1. Measure your putter shaft. Check the diameter just below the grip. Clips are often sized for standard steel or graphite shafts, and an oversized shaft may not fit the jaws.
  2. Check your putter head shape. Blade and mallet heads have different profiles. A wide mallet may need more clearance so it does not bump the bag.
  3. Look at your bag’s mounting points. Note whether the bag has a side pocket, a bungee loop or a flat panel. Choose a clip whose base matches that surface.
  4. Decide on angle and reach. Vertical clips keep the putter tight to the bag. Angled clips make the putter easier to pull without bending.
  5. Confirm the material. Rubber or soft polymer grips protect the shaft finish. Hard plastic clamps may scratch paint or graphite.

Attaching a Golf Bag Clip On Putter Holder

Once you have a clip that fits, installation takes only a few minutes. Work with the bag empty so you can check clearance as you go.

  • Clean the mounting area so the base or strap grips without slipping.
  • Tighten the strap or base fastener until the clip does not rotate when you push on it.
  • Slide the putter into the jaws below the grip and close the clamp. The shaft should sit snug but not forced.
  • Walk a short distance and shake the bag gently. Adjust the tension if the putter moves or rattles.
  • Recheck the fasteners after the first few rounds, since straps can loosen with use.

Tips and Common Mistakes

  • Do not overtighten the clamp, which can dent or scratch the shaft.
  • Avoid mounting the clip where the putter head will strike the cart path or a bag divider.
  • Check that the clip releases easily, so you can remove the putter without twisting.
  • Store the putter head-down or head-up consistently to protect the face and grip.
  • If your bag has a built-in putter slot or tube, a clip may be unnecessary. See Golf Bag with Putter Slot: 5 Picks and How to Choose One for alternatives.

A clip works best when paired with the right putter fit and bag setup. These items are worth a look:

  • Universal golf bag putter clip: A rubber-lined clamp that suits most standard shaft diameters and keeps the putter secure during walking. View on Amazon
  • Angled putter holder for golf bags: An angled design that lets you pull the putter without bending over the bag. View on Amazon
  • Replacement putter grip cover: A protective sleeve that cushions the shaft where the clip sits. View on Amazon

FAQ

Will a golf bag putter holder clip damage my shaft?

It can if the jaws are too tight or made of hard plastic. Choose a rubber-lined clip and tighten it only until the putter stays in place.

Can I use a clip on any golf bag?

Most clips attach to a side pocket, strap or bungee loop, but the bag must have a surface the base can grip. Measure your bag’s exterior before buying.

Should I mount the putter head-up or head-down?

Head-up keeps the grip accessible, while head-down protects the head and face. Choose the orientation that matches your clip’s design and your personal preference.

Conclusion

A golf bag putter holder clip is a simple way to keep your putter within reach and protected during a round. Measure your shaft, match the mount to your bag, and tighten the clamp just enough to hold firm. Check the fit after a few holes, and adjust as needed.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Putting For Par.