Golf Putter Grip Replacement: A Step-by-Step Guide for Better Feel
Learn how golf putter grip replacement works, from removing the old grip to choosing size and tape, so your putter feels solid stroke after stroke.
Updated November 2026
A golf putter grip replacement is one of the cheapest fixes for a putter that feels off in your hands. In most cases you can remove the old grip, prep the shaft, and install a new one in under an hour with basic tools. This guide covers how to pick the right grip, the removal and installation steps, and the mistakes that cause slipping or uneven feel.
Decide Whether a Replacement Is Worth It
Worn grips often look fine but feel slick, hard, or lumpy. If your palms slide during the stroke, or the surface has flattened and shiny, the grip is affecting your release and face control. Cracks, tears, and a sticky residue from sunscreen or sweat are also clear signs. Before you buy anything, check that the shaft itself is straight and undamaged, since a bent or dented shaft will not be fixed by new rubber.
Shopping for one? See our guide: 4 Best Golf Putter Grips Oversizes for Better Feel (2026).
Choose the Right Grip and Size
Putter grips come in several shapes. Round grips offer the most even feel, while pistol and ribbed designs encourage a specific hand position. Size matters just as much as shape. A grip that is too thin encourages tension, and one that is too thick can make you hold the club too loosely. Many golfers settle on a standard, midsize, or oversize option after testing a few in their hands. Look for a grip that fills your palm without forcing your fingers to wrap tightly.
How to Replace a Putter Grip
Work through these steps in order to avoid damaging the shaft.
- Clamp the shaft gently in a vise, using soft jaws or a cloth to protect the finish.
- Cut the old grip lengthwise with a utility knife, stopping before the shaft. Peel it off.
- Scrape off any remaining tape and adhesive with a rag and a small amount of solvent. Clean the shaft until it is dry and smooth.
- Measure the grip against the shaft and mark the butt end so you know where it should sit.
- Apply double-sided grip tape to the shaft, leaving the paper backing in place for now.
- Spray the inside of the new grip with grip solvent, or coat it generously if using a solvent-free adhesive, and slide it onto the shaft.
- Align the grip to your mark and let it dry for several hours, away from the grip surface, before use.
Tools You Will Need
- Vise with soft jaws
- Utility knife
- Double-sided grip tape
- Grip solvent or adhesive spray
- Rags and a clean cloth
- Measuring tape or ruler
Common Mistakes to Avoid
- Skipping the shaft cleaning step, which leaves residue that causes the grip to slip.
- Using too much solvent, which can take longer to dry and may shift the grip.
- Rushing the drying time, so the grip rotates or loosens after a few rounds.
- Cutting into the shaft with the knife, which can scratch or dent the finish.
- Installing a grip without checking the size against your hands first.
Recommended Gear
A good grip vise keeps the shaft steady so the knife work stays controlled. View on Amazon
Solvent-based grip adhesive helps the new grip slide on smoothly and set evenly. View on Amazon
Double-sided grip tape gives the new grip a secure base that resists rotation. View on Amazon
FAQ
Can I replace a putter grip at home?
Yes, most golfers can do it with a vise, a utility knife, and grip tape. Take care with the knife and work slowly to protect the shaft.
How long does a putter grip last?
Lifespan depends on how often you play and how much sweat and sunscreen reach the grip. Many golfers replace grips when they feel slick or worn, and that often means after a season of regular use.
Do I need to wait before using a new grip?
Yes, allow the adhesive to dry fully, which usually takes several hours. Following the adhesive maker’s drying time prevents the grip from shifting during play.
Conclusion
A golf putter grip replacement takes patience more than skill. Choose a grip that fits your hands, clean the shaft thoroughly, and let the adhesive cure before you putt. If you are unsure about the shaft or the fit, a club fitter or professional club repair shop can check the work.
Related reading
- Scottie Scheffler Putter Grip Golf Pride: What He Uses and How to Get It
- Putter Grips Golf Galaxy: A Step-by-Step Guide to Choosing the Right Grip (2026)
- Odyssey Golf Putter Grips: 6 Best Picks for Better Feel (2026)
Ready to choose one?
