We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Putt with a Mallet Putter: A Step-by-Step Guide for Straighter Putts

Learn how to putt with a mallet putter using a stable setup, a shoulder-driven stroke, and simple alignment checks that help you start putts on line.

Updated November 2026

To putt with a mallet putter, set up with your eyes over or just inside the ball, keep your shoulders doing most of the work, and let the heavier head swing through the ball on a smooth arc. Once your setup and stroke are consistent, you’ll find that mallet putters tend to stay more stable through impact, which helps with start line and distance control. The steps below cover the setup, the stroke, and the checks that keep the putter on track.

Set Up for a Stable Mallet Putter Stroke

Mallet putters usually have a larger head and more weight distributed around the perimeter, so a relaxed, athletic posture matters more than it does with a small blade. Stand so the ball sits just inside your front heel or under your lead eye. Bend from the hips, let your arms hang naturally, and keep your weight balanced evenly between both feet.

Shopping for one? See our guide: 6 Best Mallet V Blade Putters for Every Stroke (2026).

  • Place the ball slightly forward of center for a putter that is designed to strike the ball on the upswing or level.
  • Keep your grip pressure light, around a 3 or 4 on a 10-point scale, so the putter head can swing freely.
  • Align the putter face square to your target line before you move your feet.

Use a Shoulder-Driven Stroke

The main job of a mallet putter is to keep the face square through a pendulum motion. Rock your shoulders back and through while your wrists stay quiet. Keep your forearms and hands relatively still, and let the putter swing like a pendulum from your upper body. A useful check is to make practice strokes with a tee or alignment stick on the ground. If the stroke wanders far off the stick line, the arc is too wide or the hands are taking over.

Match Backstroke and Follow-Through

Aim for a backstroke and follow-through of roughly equal length. A stroke that goes back 12 inches and through 12 inches usually produces more consistent speed than one that takes the club back long and decelerates into the ball. Keep the putter low to the ground and let it stay close to the target line for a few inches after impact.

Read Speed and Set Your Distance

Distance control with a mallet comes from matching stroke length to putt length, not from hitting harder. Practice on a 20-foot putt and try to leave every ball within 3 feet of the hole. Many golfers find that a 3- to 4-foot putt needs only a short, smooth stroke, while a 20-foot putt calls for a longer backstroke with the same tempo. Keep your rhythm constant and let the stroke length change instead of your effort.

Practice Drills That Build Consistency

Drill What It Trains How to Do It
Gate drill Square face path Place two tees just wider than the putter head and stroke through them.
Ladder drill Distance control Putt balls to tees placed at 3, 6, and 9 feet and try to stop each ball near a tee.
Alignment stick line Stroke path Lay a stick on the target line and keep the putter head moving parallel to it.

A good alignment aid helps you confirm your setup and start line before every putt. Pick one that sits flat on the green and lines up with the back of the ball.

  • Golf alignment sticks help you check your path and see whether your shoulders are open or closed at address. View on Amazon
  • A putting mat gives you a consistent surface for repeating drills at home without worrying about grain or slope. View on Amazon
  • A putter headcover protects the face and keeps your mallet looking fresh between rounds. View on Amazon

Common Mistakes and Tips

  • Letting the wrists break down the stroke, which causes the face to open and close on the way through.
  • Standing too close to the ball, which restricts the arc and forces a hit instead of a swing.
  • Gripping too tightly, which reduces feel for distance and makes the stroke jerky.
  • Practicing only short putts. Spend time on 15- to 25-foot putts to build speed control.
  • Changing your setup after every miss. Pick one routine and stick with it for several weeks.

If you have ongoing wrist or shoulder pain while putting, check with a physical therapist or doctor before increasing practice volume.

FAQ

Should I putt with a mallet putter using a forward or center ball position?

Most mallet putters work best with the ball just forward of center, roughly under your lead eye or inside your lead heel. Test both positions on a few 6-foot putts and keep the one that gives you the most consistent roll.

How far should my putting stroke be?

For most putts, the backstroke and follow-through should be about equal in length. Longer putts need a longer stroke, but the tempo should stay the same.

Can I use the same stroke with a mallet and a blade putter?

The basic pendulum motion is similar, but a mallet’s heavier perimeter weighting can feel more stable and may need a slightly smoother tempo. Practice with each putter before switching in competition.

Conclusion

To putt with a mallet putter, focus on a balanced setup, a shoulder-driven stroke, and equal backstroke and follow-through. Use simple drills such as the gate and ladder drills to build square contact and distance control. With regular practice, the mallet’s stability will help you start more putts on your intended line.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Putting For Par.