LSU Mallet Putter Cover: How to Choose the Right One (Step-by-Step)

By Owen Palmer

Updated November 2026

An lsu mallet putter cover protects your putter head from dings and scratches while letting you show team pride on the course. This guide walks you through checking fit, matching the cover to your putter, and making sure it stays on through every stroke. By the end, you will know exactly what to look for before you buy.

Step 1: Measure Your Putter Head

Mallet heads vary more than most golfers expect. Before you shop, measure the widest point of the head from heel to toe and the depth from face to back. Most mallet covers are sized by head shape and length, so a few millimeters can mean the difference between a snug fit and one that slides around.

Shopping for one? See our guide: 6 Best Mallet Golf Putter Covers for Every Golfer (2026).

Check the shaft diameter where the cover closes, too. Many LSU covers use a fabric collar with a drawstring or hook-and-loop closure. If your shaft is thicker than average, look for a cover with a stretchy opening or a wider throat.

Step 2: Match the Cover to Your Putter Shape

Mallet putters come in center-shafted, plumber-neck, and front-shafted designs, and not every cover works with every shaft placement. A center-shafted putter needs a cover with a central opening, while a side-shafted model needs one that wraps around the hosel. Confirm the design before you buy, or you may end up with a cover that bunches up or sits crooked.

Pay attention to the face area as well. A cover that covers too much of the face can affect how the head sits at address, so choose one that leaves the striking surface clear.

Step 3: Check Material and Closure Security

Most LSU covers are made from knit, polyester, or leather-look synthetic. Knit fabric stretches for a snug fit and is easy to slip on, while synthetic leather resists moisture and wipes clean more easily. Choose based on how you store your bag: if your clubs ride in a wet or humid environment, a water-resistant material is the safer choice.

Test the closure before you commit. A magnetic or hook-and-loop closure should hold firm when you tilt the head. A drawstring should not pull loose during a practice swing.

Step 4: Confirm Fit Before Every Round

Once the cover arrives, put it on the putter and give the head a few firm taps against your palm. The cover should stay put without you having to pinch it into place. Then take three or four practice strokes to make sure the cover does not shift during the backswing or follow-through.

Quick Fit Checklist

Measure head width, depth, and shaft diameter.
Confirm the cover matches your shaft placement.
Choose a material suited to your storage conditions.
Test the closure with a light tug and a few practice swings.
Check that the face stays uncovered.

Common Mistakes

Buying by team color alone without checking head shape.
Choosing a tight-fitting knit cover for a thick-shafted putter.
Ignoring the closure, which is where most covers come loose.
Leaving the cover on in a wet bag, which can trap moisture.
Forgetting to remove the cover before a stroke, causing a slight drag on the head.

Recommended Gear

A soft microfiber cloth helps you clean the putter face and remove grit before you slip the cover on, which keeps the fit secure. View on Amazon

A small golf bag divider or headcover storage pouch keeps your putter from knocking against other clubs when the cover is off. View on Amazon

FAQ

Will an LSU mallet putter cover fit any mallet putter?

Not always. Covers are sized for specific head shapes and shaft placements, so check the measurements and shaft design before buying.

How do I keep my LSU putter cover from falling off?

Choose a cover with a secure closure such as a drawstring or hook-and-loop strap, and confirm the fit with a few practice swings before your round.

Should I remove the cover when putting?

Yes. Remove the cover before you putt so the head swings freely and you can see the alignment line on the face.

Conclusion

Choosing the right lsu mallet putter cover comes down to measuring your head, matching the shaft placement, and testing the closure. A well-fitted cover protects your putter and keeps your bag looking sharp. Take a few minutes to check the fit, and it will stay on from the first tee to the final putt.

Ready to choose one?

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer

Owen Palmer writes reviews and buying guides for Putting For Par.