We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Printable Golf Putter Cover Template: Make Your Own in 6 Steps (2026)

Use this printable golf putter cover template to measure your putter head, cut a custom cover, and protect your blade or mallet with a fit that lasts.

Updated November 2026

A printable golf putter cover template gives you a flat pattern you can trace onto fabric, cut out, and sew into a head cover that fits your putter snugly. The process takes a few measurements, a printed or hand-drawn pattern, and basic sewing. This guide walks through each step so your finished cover protects the face and hosel without rattling in your bag.

Measure Your Putter Head Before You Print

Every template starts with accurate measurements, so don’t skip this step. Measure the head at its widest point across the toe and heel, the total height from sole to crown, and the depth from face to back. Mallet heads usually need more depth than blades because of their larger body. Measure the shaft diameter at the hosel too, since the opening must clear it.

Shopping for one? See our guide: 6 Best Mallet Golf Putter Covers for Every Golfer (2026).

Add about 1/8 inch to each measurement for stitching allowance and a little room for the cover to slide on and off. If you are unsure whether your head is a blade or mallet style, the Golf Putter Cover Blade Guide: How to Choose and Fit One (2026) explains the differences in shape and fit.

Print the template at 100 percent scale with no “fit to page” setting, or the dimensions will shift. Check the scale bar or a printed reference square: it should measure exactly one inch on paper. If your measurements don’t match the printed outline, adjust the pattern in a drawing program instead of forcing the head into the cover later.

  1. Print the template on plain paper and confirm the scale square measures one inch.
  2. Trace the pattern onto stiff card or cardstock to create a reusable stencil.
  3. Mark the hosel opening and the front stitch line on the stencil.
  4. Cut the stencil out and test-fit it around your putter head with a strip of paper or cloth.

Cut, Pin, and Sew the Cover

Trace the stencil onto your fabric, adding a 1/4-inch seam allowance around the edges. Use a fabric that holds its shape, such as felt, neoprene, or a stretch knit with some structure. Cut two matching pieces for the front and back, then pin them right sides together. Sew the seams with a straight stitch and reinforce the stress points near the hosel.

Turn the cover right side out and test it on the putter. If the fit is tight, let out the seam slightly. If it is loose, take in the seam by a few millimeters. A snug fit keeps the cover from shifting during swings and from falling off when you lift the bag.

Add a Closure That Stays Put

A closure keeps the cover secure on the head. A small hook-and-loop strip or a snap works well on the hosel side. Place it so it does not rub the shaft or interfere with your grip.

  • Neoprene sheet for the body: Neoprene holds its shape and resists moisture, so the cover keeps its form over many rounds. View on Amazon
  • Fabric scissors and a rotary cutter: Clean, straight cuts make the front and back pieces match, which improves the final fit. View on Amazon
  • Hook-and-loop closure strips: Self-adhesive strips add a secure closure without needing buttons or snaps. View on Amazon

Common Mistakes to Avoid

  • Printing at “fit to page,” which shrinks or stretches the pattern.
  • Skipping the seam allowance, leaving the cover too tight to slide on.
  • Using stretchy fabric without structure, which can sag and fall off the head.
  • Sewing the hosel opening too small, causing the cover to bind on the shaft.
  • Testing the fit only once instead of trying the cover on after each change.

FAQ

Can I use any printer to make a printable golf putter cover template?

Most standard home printers work, as long as you print at 100 percent scale and check the one-inch reference square. Avoid “fit to page” settings, which change the dimensions.

What fabric works best for a homemade putter cover?

Neoprene, felt, and structured knits hold their shape well and protect the putter face. Very stretchy fabrics tend to sag over time.

How do I know if the cover will fit my putter?

Measure the head width, height, and depth, then add about 1/8 inch for clearance. Test the stencil with paper or cloth before cutting your final fabric.

Conclusion

A printable golf putter cover template makes it simple to build a cover that matches your exact head shape. Measure carefully, print at true scale, and test the fit before you sew. With a little patience, you will have a snug, protective cover that stays on through every round.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Putting For Par.