Texas Longhorns Mallet Putter Cover: How to Choose One That Fits (2026)

Updated November 2026

A texas longhorns mallet putter cover is a headcover that protects a mallet-style putter while showing off Texas Longhorns colors and logo. This guide walks you through checking fit, material and closure so you end up with a cover that stays on your putter and holds up round after round. Use the steps below before you buy or order a custom one.

Step 1: Confirm Your Putter Head Shape and Shaft Type

Mallet heads come in many sizes, from compact shapes to large, deep-faced models. Measure the head from heel to toe and front to back, then compare those numbers to the cover’s listed interior dimensions. A cover that is too small will strain the seams, and one that is too large will shift during the stroke.

Shopping for one? See our guide: 6 Best Mallet Golf Putter Covers for Every Golfer (2026).

Shaft type matters too. Center-shafted putters need a cover with a shaft opening positioned at the center of the head, while heel-shafted designs need an offset opening. Many listings state which configuration they fit, so check that before you order.

Step 2: Choose a Material That Suits Your Climate

Most mallet covers use synthetic leather, neoprene or knit fabric. Synthetic leather resists moisture and wipes clean easily, which suits humid courses or morning dew. Neoprene grips the head snugly and cushions it in the bag. Knit fabrics are light and breathable but absorb more water and show dirt faster.

Step 3: Check the Closure and Attachment

The closure decides whether the cover stays put during a round. Common options include:

• Hook-and-loop strap: adjustable, easy to remove, and good for varied head sizes.
• Magnetic closure: quick to open and close, though confirm the magnets are strong enough to hold through a full bag carry.
• Elastic or snap closure: low profile and secure when the fit is exact.

Test the closure by pulling the cover gently in several directions. It should stay seated without pinching the shaft.

Step 4: Verify the Team Design and Logo Quality

Team covers vary in how the logo is applied. Embroidered logos hold up better than printed ones over repeated bag friction. Look at how the colors are placed on the front and back so the design lines up with the face when the cover is on. If you plan to give the cover as a gift, check whether the listing describes official licensing or a generic fan design, since that affects appearance and quality.

Common Mistakes to Avoid

• Buying by appearance alone and skipping the head measurements.
• Ignoring shaft configuration, which can leave the cover loose or misaligned.
• Choosing a thin material for a humid region, where moisture can warp the shape over time.
• Overtightening a strap, which can crease the cover and wear the seams.
• Forgetting to check whether your putter is center-shafted or heel-shafted before ordering.

If you are still deciding on a cover style, the guide Small Mallet Putter Cover: 7 Best Picks for Every Stroke (2026) covers compact fits, and Premium Mallet Putter Cover: Is It Worth the Extra Cost? explains when a higher-end material pays off. For center-shafted putters, Center Shafted Mid Mallet Putter Cover: How to Choose and Fit One (2026) goes deeper into alignment.

Recommended Gear

• A soft measuring tape helps you record head length, depth and shaft position before comparing covers. View on Amazon
• A small cleaning brush keeps synthetic leather and knit covers free of grass and grit so they wear more evenly. View on Amazon

FAQ

How do I know if a texas longhorns mallet putter cover will fit my putter?

Measure your putter head’s length, depth and shaft position, then compare those figures to the cover’s listed dimensions. Confirm whether the cover is built for a center or heel shaft.

Which material is best for a texas longhorns mallet putter cover?

Synthetic leather suits humid or wet conditions because it resists moisture. Neoprene offers a snug, cushioned fit, while knit fabric is lighter but absorbs more water.

How do I clean a mallet putter cover?

Brush off dirt and grass after each round, then wipe with a damp cloth and let it air dry away from direct heat. Avoid harsh cleaners that can fade the team colors.

Conclusion

A texas longhorns mallet putter cover should match your putter’s head size and shaft configuration, use a material suited to your climate and close securely. Check the logo quality and closure before you buy. Measure first, and you will end up with a cover that fits well and lasts.

Related reading

• LSU Mallet Putter Cover: How to Choose the Right One (Step-by-Step)
• How to Make a Mallet Putter Cover: A Step-by-Step Guide for Beginners

About the author