Golf Pride Tour Velvet Cord Putter Grip: A Practical Guide (2026)
Learn how the golf pride tour velvet cord putter grip feels, how to fit it to your stroke, and how to install and care for it so it lasts.
Updated November 2026
The golf pride tour velvet cord putter grip is a midsize-to-standard grip with a soft, slightly tacky surface and a cord-reinforced texture that many golfers use for a quiet, controlled feel. This guide explains what the grip does well, how to decide whether it suits your stroke, and how to install and maintain it so it performs over time.
What the Tour Velvet Cord Grip Offers
The Tour Velvet Cord is built around a fine cord texture embedded in a soft rubber compound. The surface gives a little under pressure, which helps golfers who grip the putter lightly and want to feel the face through the handle without excess firmness. Manufacturers describe the cord as adding grip security in damp conditions while keeping the hand from sliding during the stroke.
Shopping for one? See our guide: Golf Pride Grips Putter: 3 Best Picks for Every Stroke (2026).
Owners often report that the grip feels most natural to those who prefer a light, dry hold. Golfers who sweat heavily or who like a very firm top hand may find the texture less aggressive than a rubber-only grip.
How to Decide If It Fits Your Stroke
Before buying, check three things:
- Hand size: Measure from your palm crease to the tip of your ring finger. Shorter hands often prefer a standard diameter, while larger hands may want a midsize option.
- Grip pressure: If you hold the putter loosely, the soft surface will feel comfortable. If you squeeze hard, consider a firmer or more textured grip.
- Grip style: Claw, reverse overlap and conventional grips all work with this grip, but your top-hand position will change how the cord feels against the palm.
If you are unsure, compare the diameter against your current grip with a ruler at the widest point. Matching the size you already like is the safest starting point.
Installing the Golf Pride Tour Velvet Putter Grip
Replacing a putter grip is a simple job, but it goes wrong if the shaft is not clean or the tape is misaligned. Gather a utility knife, a grip solvent or alcohol-based cleaner, double-sided grip tape, a rag and a vise or stable clamp.
- Clamp the shaft lightly at the grip area, protecting it with a rag so the finish is not scratched.
- Cut the old grip lengthwise with the utility knife and peel it away. Remove all old tape residue.
- Clean the shaft with solvent and let it dry fully.
- Apply double-sided tape from the butt end toward the top, keeping it flat and avoiding wrinkles.
- Spray the inside of the new grip and the tape with solvent so it slides on easily.
- Slide the grip on quickly and align the seam with the putter face. Hold it in place for 30 seconds.
- Let the grip sit untouched for at least several hours before using it, so the adhesive can set.
Common Mistakes and Tips
- Skipping the solvent step leaves residue that makes the grip slip on the shaft.
- Installing the seam at the wrong angle changes your alignment feel. Set it square to the face.
- Using too little solvent makes the grip hard to seat, while too much can soften the tape early.
- Wiping the grip with a dry towel after each round helps keep the cord texture clean.
- Replace the grip when the surface feels glossy or smooth, since the cord texture is what provides the feel.
Recommended Gear
- Double-sided grip tape: Provides a firm bond between shaft and grip and makes alignment repeatable. View on Amazon
- Grip solvent: Lets the new grip slide into place and dries without leaving residue on the shaft. View on Amazon
- Utility knife with spare blades: Makes clean, controlled cuts when removing the old grip. View on Amazon
For more on how grip size and style affect your stroke, see Golf Putter Grip Styles: A Guide to Choosing the Right Feel and Golf Putter Grip Replacement: A Step-by-Step Guide for Better Feel. Golfers comparing alternatives may also want Golf Pride Reverse Taper Putter Grip: 3 Best Picks for Every Stroke and How to Grip a Golf Putter: A Step-by-Step Guide for Better Feel.
FAQ
Is the Tour Velvet Cord grip good for sweaty hands?
The cord texture helps many golfers keep control in damp conditions, though heavy sweaters may still prefer a grip with a more aggressive surface. Drying your hands before each putt helps regardless of grip choice.
Can I install this grip without a vise?
You can, but a clamp or vise holds the shaft steady and makes alignment easier. Work on a stable surface and protect the shaft finish if you skip the clamp.
How often should I replace a putter grip?
Replace it when the surface feels slick, cracked or worn, or when the grip no longer feels consistent in your hands. Check the official manufacturer guidance for specific recommendations.
Conclusion
The golf pride tour velvet cord putter grip suits golfers who want a soft, controlled feel with a cord texture for security. Match the diameter to your hand size, clean the shaft thoroughly during installation, and let the adhesive set fully before use. With those steps, the grip should feel consistent round after round.
Ready to choose one?
