We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Golf Putter Grip Size Chart: How to Pick the Right Grip Diameter

Use this golf putter grip size chart to match grip diameter to your hand size, so your putting stroke feels steady and controlled from setup to finish.

Updated November 2026

A golf putter grip size chart matches grip diameter to your hand size, so you can choose a grip that keeps your hands quiet and your stroke consistent. Measure your gloves or palm, look up the matching diameter range, then confirm the fit by how the grip feels in your fingers at address. This guide shows you how.

Why Grip Size Matters for Your Putting Stroke

A grip that is too thin lets your hands work independently, which tends to add wrist action and face rotation. A grip that is too thick can feel stiff and reduce the sensitivity you need for distance control. Most putting problems that players blame on technique start with a grip that does not match their hands. For background on grip shapes, see Golf Putter Grip Styles: A Guide to Choosing the Right Feel.

Shopping for one? See our guide: 3 Best Golf Putter Size Chart Cards for Every Golfer (2026).

Step 1: Measure Your Hand Size

Use a simple measurement to find your starting point. Most charts reference glove size or the length of your palm.

  • Measure from the crease at the base of your palm to the tip of your ring finger, in inches.
  • Alternatively, note your glove size (S, M, L, XL) if you already know it.
  • Record both if you can. If they point to different sizes, choose the one that feels more comfortable when you hold a club.

Step 2: Match Your Measurement to a Grip Diameter

Manufacturers publish their own sizing, so always check the specific brand’s chart. As a general guide, players with smaller hands often fit standard or thinner grips, average hands fit standard, and larger hands fit midsize or jumbo grips. Use the table below as a starting reference only.

Glove size Typical palm length Common grip category
S Under about 7.0 in Standard or thinner
M About 7.0 to 7.5 in Standard
L About 7.5 to 8.0 in Midsize
XL Over about 8.0 in Midsize or jumbo

Step 3: Test the Fit at Address

A chart gets you close, but your setup decides the final choice. Take your putting posture and check these points: We also found Top Flite Junior Golf Clubs Size Chart: A Practical Guide (2026) useful on this point.

  1. Hold the grip in your normal putting position with your eyes over the ball.
  2. Your fingers should wrap the grip with a small gap, not a squeeze. You should be able to slide a finger into the gap at the base of your palm.
  3. Your thumbs should sit comfortably on the grip without pressing hard.
  4. Make a few slow strokes. If your wrists feel active or your hands feel pinched, try a different size.

If you are replacing a grip on a putter you already own, check the grip diameter at the top and bottom, since many players swap to a different size during a rebuild. The process is covered in Golf Putter Grip Replacement: A Step-by-Step Guide for Better Feel.

Step 4: Consider Putter Length and Grip Shape Together

Grip size works together with putter length. A longer putter may pair better with a slightly larger grip, because your hands sit a bit lower and farther from your body. Check your overall setup with a length reference such as Golf Putter Length Chart: How to Find the Right Putter Length (2026) before you finalize your grip choice.

Common Mistakes

  • Choosing a grip based on looks or what a pro uses, rather than your own hand measurement.
  • Going too thick because it feels more “stable” at first, then losing feel on short putts.
  • Ignoring the gap between palm and grip, which often causes hand tension.
  • Measuring once and never retesting after a change in putter length or stance.
  • Assuming all brands share the same diameters. Always read the specific chart.

A few tools make grip sizing and replacement easier:

  • Golf Pride grip kit: Useful if you plan to re-grip a putter and want a matching tape, solvent and vise option for a clean install. View on Amazon
  • Flexible measuring tape: A simple way to measure palm length accurately at home. View on Amazon
  • Putter grip vise: Holds the shaft steady so you can install a new grip without slipping. View on Amazon

FAQ

How do I know if my putter grip is too big?

If your fingers feel crowded, your wrists feel active during the stroke, or your palm pushes against the grip, it may be too thick. Test a smaller size and compare how the stroke feels.

Can I use a grip size chart from a different brand?

Treat other brands’ charts as rough guides only. Diameters vary by manufacturer, so check the chart that belongs to the grip you plan to buy.

Should I get a professional fitting for my putter grip?

A club fitter can help if you have ongoing wrist or hand discomfort, or if you want a precise match. For any physical pain, consult a qualified medical professional or a certified club fitter.

Conclusion

Measure your palm or glove size, match it to the right grip category, and confirm the fit with a few practice strokes at address. Your hands should stay quiet and the grip should feel secure without tension. Once the size feels right, focus on consistent setup and stroke mechanics.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Putting For Par.