We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Put with a Mallet Putter: A Practical Guide (2026)

Learn how to putt with a mallet putter using a simple setup, a stable stroke and proper alignment. Follow these steps to start rolling straighter putts.

Updated November 2026

Learning how to putt with a mallet putter comes down to three things: a square, balanced setup, a stroke that swings from the shoulders, and a face that stays square at impact. Mallet heads usually have more weight spread toward the heel and toe, so they tend to resist twisting. That stability helps many golfers, but only if the setup and stroke are consistent. This guide walks through each step so you can start making more putts with confidence.

Set Up Your Stance and Alignment

Start by standing with your feet about shoulder-width apart, or slightly narrower. Keep your weight balanced evenly between both feet. Bend from the hips and let your arms hang straight down from your shoulders, with your hands under your chin or slightly ahead of it. Your eyes should sit directly over the ball or just inside it, which lets you see the line clearly.

Shopping for one? See our guide: 6 Best Mallet V Blade Putters for Every Stroke (2026).

Most mallet putters have an alignment line or a flat sightline on the top of the head. Place that line along your target line, then check that the clubface sits square to the start line. Many golfers find it helpful to set the putter behind the ball first, then square the face before settling into their stance.

Build a Stable, Shoulder-Driven Stroke

Mallet putters are generally forgiving on off-center hits, but they still need a stroke that returns the face to square. Use your shoulders to swing the putter back and through, keeping your wrists quiet. Your arms and the putter should form a stable triangle that moves as one unit.

A useful drill is to take the putter back to a point about the same distance as you want the ball to roll, then through to a matching follow-through. Keep the length of the backswing and follow-through roughly equal. A stroke that is longer on one side tends to pull or push the ball off line.

Keep the Putter Face Square

Mallets often have a larger face area, which makes small face errors easier to spot. Focus on keeping the leading edge pointed at your target through impact. If you see the ball curving consistently, check whether your face is opening or closing during the stroke rather than adjusting your aim.

Strike the Ball Consistently

Good contact matters on every putt. Aim for the sweet spot on the face, which is usually near the center of the face on a mallet. A ball struck toward the toe or heel can lose speed and drift off line, even when the stroke path is correct.

  1. Set your putter behind the ball and confirm the face is square.
  2. Take a slow backswing with your shoulders, keeping your head still.
  3. Accelerate smoothly through the ball, letting the putter finish low and pointed at the target.
  4. Hold your finish for a moment to check that your face stayed on line.

Practice Distance Control and Line Reading

Once your setup and stroke feel stable, spend time on distance control. Place three tees in a line at 3, 6 and 9 feet, then try to roll the ball past each tee without stopping short. Consistent pace matters more than perfect aim on most greens.

For line reading, walk the putt from behind the ball and from the side. Look for slopes and grain, then choose one target spot on the green that you can see clearly. Using a single spot keeps your focus on the stroke rather than on second-guessing the line.

Common Mistakes

  • Lifting your head early to watch the ball roll, which pulls the stroke off line.
  • Using your wrists to hit the ball, which opens or closes the face unpredictably.
  • Standing too far from the ball, which makes it harder to see the sightline and the target.
  • Making the backswing longer than the follow-through, which often causes pulled or pushed putts.
  • Changing your setup from putt to putt instead of building a repeatable routine.
  • A putting mat with a visible line or markings helps you groove a square stroke at home. View on Amazon
  • A set of alignment tees or a training aid gives you a clear visual check for your start line and stroke path. View on Amazon

FAQ

Should I use a different grip with a mallet putter?

Many golfers use the same grip they use with a blade, but some find a slightly lighter grip pressure helps the putter swing freely. Try both and choose the one that keeps your face square through impact.

Why does my mallet putter pull putts left?

A pull is often caused by an open face at impact or by an inside-out stroke path. Check your alignment first, then focus on keeping the putter moving straight through the target line.

How long should I practice putting with a mallet?

Short, regular sessions work better than long ones. Ten to fifteen minutes a few times a week on distance and line drills will build more consistency than one long session.

Conclusion

Putting well with a mallet putter depends on a balanced setup, a shoulder-driven stroke and a square face at impact. Work through alignment, stroke and strike in order, then add distance and line drills to sharpen your results. Keep practicing with a simple routine, and your putts should start rolling where you aim them.

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our putting & short game guides, checking product details against manufacturer specifications and owner feedback.

About the author

Owen Palmer
Owen Palmer

Owen Palmer writes reviews and buying guides for Putting For Par.